Bitswap

Wireless controller initialisation quick notes

Posted by Andy on April 2, 2009

Startup Wizard

System Name [Cisco_25:d6:c0] (31 characters max):
Enter Administrative User Name (24 characters max): admin
Enter Administrative Password (24 characters max): *****
Re-enter Administrative Password : *****
!
! Ensures that the controller can communicate with the GUI, CLI, or Cisco WCS (either directly or indirectly)
! through the service port by accepting a valid IP configuration protocol (none or DHCP), and if none, IP @
! Address and netmask. If you do not want to use the service port, enter 0.0.0.0 for the IP Address and
! netmask.
screenshot-4_2_2009-4_09_20-pm
! Ensures that the controller can communicate with the network (802.11 Distribution System) through the
! management interface by collecting a valid static IP Address, netmask, default router IP address, VLAN
! identifier, and physical port assignment.
!
Management Interface IP Address: 172.16.1.30
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 172.16.1.1
Management Interface VLAN Identifier (0 = untagged):
Management Interface Port Num [1 to 8]: 1
!
! Prompts for the IP address of the DHCP server used to supply IP addresses to clients, the controller
! management interface, and optionally to the service port interface.
!
! AP-manager interface (When using Layer 3 LWAPP, static and configured at setup time; mandatory)
!
Management Interface DHCP Server IP Address: 171.16.1.20
AP Manager Interface IP Address: 1.1.1.1
AP Manager Interface Netmask: 255.255.255.0
AP Manager Interface Default Router: 1.1.1.2
AP Manager Interface VLAN Identifier (0 = untagged):
AP Manager Interface Port Num [1 to 8]: 2
AP Manager Interface DHCP Server (171.16.1.20):
!
! Collects the Virtual Gateway IP Address; any fictitious, unassigned IP address (such as 1.1.1.1) to be used
! by Layer 3 Security and Mobility managers.
!
Virtual Gateway IP Address: 2.2.2.2
Mobility/RF Group Name: RF1
Network Name (SSID): SSID
Allow Static IP Addresses [YES][no]:
Configure a RADIUS Server now? [YES][no]: no
Enter Country Code list (enter ‘help’ for a list of countries) [US]:
Enable 802.11b Network [YES][no]:
Enable 802.11a Network [YES][no]:
Enable 802.11g Network [YES][no]:
Enable Auto-RF [YES][no]:
Configure a NTP server now? [YES][no]:
Enter the NTP server’s IP address: 172.16.1.1
Enter a polling interval between 3600 and 604800 secs: 3600
Configuration correct? If yes, system will save it and reset. [yes][NO]: yes
Configuration saved!
Resetting system with new configuration…
Configuration saved!
Resetting system with new configuration…
calling reboot…

screenshot-4_2_2009-4_59_58-pm

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: